PNI KW11 16A, 11KW charging station, for electric cars, 85V - 415V, three-phase, 7-pin Type2 cable, 3.5 inch screen, with Blueto
PNI KW11 electric charging station, three-phase, 11KW, with Type2 cable, 3.5 inch screen, control via application and RFID card. Weather resistance, ideal for residential or commercial use.
Description
EV Charging Station – 11 kW, three-phase 16A
The station offers a fast charging capacity, ideal for residential use. It is compatible with electric vehicles that accept this power.
The device operates stably in a wide range of voltages (85V – 415V), being compatible with standard electrical networks in Romania. This versatility ensures constant performance, even in conditions of varying supply voltage.

Type 2 cable with 7-pin connector
Equipped with a standard Type 2 7-pin connector, the station is compatible with most electric vehicles available on the European market. Connection is quick and safe, without additional steps.

Bluetooth control and mobile application
The station allows complete management of charging sessions directly from the mobile application: start/stop, programming, consumption monitoring, notifications. It is a practical solution, especially for multiple users or car fleets.

Authentication system: mobile application + RFID card
Access to the charging station can be done either by phone or by RFID card. The user can decide who has access and can safely manage the use of the station, without the risk of unauthorized use.

Installation details
The station is suitable for users looking for a reliable, modern, but easy-to-manage solution. It integrates optimally in individual homes with a three-phase network, office spaces or commercial areas, guesthouses, private parking lots or company headquarters.
The station is installed permanently, either on the wall or on a dedicated support, depending on the space and needs. For a safe and correct installation, the involvement of an authorized electrician is recommended, considering the power of 11 kW. After installation, use is simple and efficient: direct control via application or RFID card.

Three-phase power connector
The station is powered by a plug&play 16A 3P+N+PE three-phase power connector with a diameter of 43 mm. The length of the power cable is 1 meter. Thus, the user benefits from a high level of safety in using the station, thanks to the possibility of quick disconnection.

Technical Data
| Product Identification | |
|---|---|
| Product code | PNI-KW11 |
| Color | Black |
| General features | |
| Charging station type | Fixed |
| Charging mode | Mode 3 |
| Supply voltage | Three-phase: 85 - 415 V AC |
| Output voltage | 85 - 415 V |
| Input frequency | 50/60 Hz |
| Rated current | 16 A (factory setting) (selectable 8A/10A/13A/16A) |
| Configuration/use | - Access/activation card |
| - via Bluetooth V4.2 | |
| - mobile application | KW22 |
| Usage temperature | -25 ~ 50°C |
| General protection level | IP55 |
| Fire protection level | UL94V-0 |
| Maximum altitude | less than 2000 m |
| Type 2 cable length | 5 m |
| Vehicle charging connector | Type 2 |
| Connector power supply | three-phase 16A 3P+N+PE (plug diameter: 43mm; cable length 1m) |
| Package contains | |
| Charging station | Yes |
| Mounting accessories | - wall mounting plate |
| - fixing screws | |
| User manual | Yes |
| Access/activation card | Yes |